New Items
splined transmission shaft (gearbox main shaft / output shaft type)
Get Latest Price
| Outer Diameter | 35 mm |
| Material | Alloy Steel |
| Shaft Length | 300 mm |
| Hardness | 28–32 HRC |
| No. of Splines | 6 |
| Usage Application | Automotive |
| Fit Class | Medium Fit |
Differential Carrier (Flanged Type)
Get Latest Price
| Vehicle Type | Truck |
| Axle Type | Front Axle |
| Carrier Type | Single Speed |
| Differential Ratio | 5.2 |
| With Crown Wheel | Yes |
Cross & Bearing Kit
Get Latest Price
| Application | Automotive |
| Bearing Type | Ball |
| Vehicle Type | Tractor |
| Packaging Type | Box |
-
Bearing Type: Needle roller bearings
-
Lubrication: Grease lubricated (with grease nipple/zerk fitting)
-
Application: Automotive driveline, trucks, tractors, industrial shafts
-
Common Sizes:
-
Bearing cap diameter: 20 mm – 40 mm
-
Cross span: 50 mm – 120 mm (varies by model)
-
Cast Iron V-Belt Pulley
Get Latest Price
| Outer Diameter (OD) | 10 inch |
| Groove Section | SPA |
Single Groove V-Belt Pulley
Construction: 4-Spoke design with machined outer rim
Mounting: Central hub with 4 bolt holes (for shaft fixing / flange mounting)
Bore Type: Pilot bore / Finished bore (as per requirement)
Outer Surface: Precision machined belt running surface
Engine Connecting Rod (Con Rod)
Get Latest Price
| Vehicle Make | Mahindra |
| Material | Alloy Steel |
| Rod Length | 170 mm |
| Bolt Size | M11 |
| Surface Finish | Polished |
Split type with cap
Machined housing bore
Fitted with bearing shell
Stepped Dowel Pin / Stepped Shaft Pin
Get Latest Price
| Pin Diameter | 6 mm |
| Pin Length | 8 mm |
Type: Precision ground stepped pin
Design: Two equal diameter ends with reduced center section (relief portion)
Material: High carbon steel / Alloy steel
Hardness: 55–62 HRC (if hardened type)
Surface Finish: Ground & polished
Tolerance: h6 / h7 (as per application)
Standard: As per DIN / ISO (custom size possible)
Application: Used for alignment, location, hinge pin, jig & fixture, or shaft support in mechanical assemblies
High Lift Camshaft
Get Latest Price
| Part Type | Camshaft Gear |
Kick Start Shaft
Get Latest Price
| Vehicle Brand | Yamaha |
Banjo Bolt (Hollow Bolt / Oil Passage Bolt) Specification:
Get Latest Price
| Thread Size | 3/8 inch |
| Thread Type | Metric |
| Banjo Configuration | Straight |
-
Type: Hex head hollow bolt
-
Design: Axial through hole with multiple radial cross holes for fluid passage
-
Thread: Metric / UNF (commonly M10×1, M12×1.25, M14×1.5 etc. depending on application)
-
Material: High tensile alloy steel
-
Finish: Black oxide / Phosphated
-
Application: Used in hydraulic systems, brake lines, fuel lines, and lubrication systems for fluid transfer through banjo fittings
If you need exact thread size and length specification, please provide dimensions.
Bolt
Get Latest Price
| Diameter | 12 mm (1/2 Inch) |
| Length | 50 mm |
| Head Type | Round |
| Finish | Zinc Plated |
Timing Gear Wheel (Spur Gear Disc Type)
Get Latest Price
| Gear Type | Spur |
| Material | Mild Steel |
| Number Of Teeth | 60 teeth |
| Outer Diameter | 50 mm |
| Hardness | Up To 200 HB |
Minimum order quantity: 10 10 Pieces
Youk
Get Latest Price
| Yoke Type | Implement Side Yoke |
| Spline Size | 8 Spline |
| Compatible Hp | 36 50 HP |
| Compatible Implement | Rotavator |
Minimum order quantity: 10 10 pcs
A JCB yoke is a mechanical component used in the propeller shaft (drive shaft) assembly of JCB machines. It connects the shaft to the universal joint (U-joint) and transmits torque from the gearbox to the differential.
Bronze Bush
GEAR PIN
Gear Parts
BUSH
GEAR
PIN
Jcb Pin
Gear Motor
Youk
Carrier Plate
PIN
Transmission Parts
GEAR
Clutch Plate
Contact Us
Jasdeep Kalsi
Kalsi Engineering Company
C-64, Mayapuri Industrial Area, Phase- II
New Delhi - 110064, Delhi, India